IndustrialDriveDataDrive Board & Diagnostic Database
ABB fault record

FAULT LOG / RESET: Fault History Review and Controlled Reset

The drive has a stored fault, intermittent trip history or a user request to clear the fault without understanding the triggering condition.

Meaning of the indication

Fault reset is an evidence-management step, not a repair. The fault log should be captured before clearing so timing, repeated code patterns and operating conditions can be reconstructed.

Checking order

  1. Photograph or record the displayed fault code, time/order and operating condition before clearing.
  2. Separate a single nuisance trip from a repeating protection event.
  3. Review whether the fault appears after power-up, start command, acceleration, deceleration, stop or ambient heating.
  4. Confirm external start/stop and direction commands are not causing unexpected restarts or resets.
  5. Only reset after the immediate hazardous cause has been evaluated.

Suspect areas

Fault historyKeypad operationExternal control commandsParameter stateIntermittent line/load condition
Fault-specific caution

Clearing a fault without recording it destroys diagnostic evidence and can hide a dangerous recurring condition.

Diagnostic workflow

Workflow
ABB ACS510 / ACS550 Fault Log Evidence Workflow

A user wants to clear a stored ABB drive fault or request help without losing the event trail.

Open →