Scope of this technical record
Hitachi Sj300 5P5Kw Drawing Family page connecting public manual demand with owner-supplied SJ300 board drawing evidence and repair/replacement decisions.
For qualified industrial-drive technicians only. SJ300/L300P drives contain hazardous DC-link energy after isolation; this page organizes evidence and does not define live measurement procedures.
Technician demand and public supply gap
Users checking for Hitachi Sj300 5P5Kw Drawing Family generally have a stopped legacy drive, a displayed code, a blank operator panel or a repair-versus-replacement decision. Public material often satisfies the definition layer, but not the continuous path from trip timing to external checks, board-region evidence and replacement risk.
IndustrialDriveData positions this page as a decision route, not another manual excerpt. It tells a repair buyer or technician what evidence to preserve before purchasing a used board, shipping a drive or replacing the whole inverter.
Attachment-supported evidence
The owner-supplied material contains SJ300 5.5 kW and 7.5 kW DB1-DB4 drawing groups. These support board-family routing for current feedback, output stage, control supply, display and bus-voltage questions without redistributing the original drawings.
Official sources provide the error vocabulary: E01-E04 overcurrent by operating condition, E05 overload, E07 overvoltage, E09 undervoltage and status-at-trip clues. The new page connects those terms to evidence collection.
Evidence boundary
| Evidence | Supports | Does not prove |
|---|---|---|
| Manual code | Correct fault vocabulary | Failed component |
| DB1-DB4 drawing family | Board-region routing | Universal compatibility |
| Used-board listing | Continuing demand | Safe replacement |
Repair decision route
The practical route starts outside the drive: model suffix, voltage, load, trip timing, motor/cable condition and prior repair history. Only then does internal board evidence become meaningful.
This protects against the common legacy-drive mistake of buying a used motherboard or keypad while the original supply, bus or output-stage failure remains unresolved.
Limits and next evidence
The page does not claim that every SJ300 or L300P frame uses the same assembly. Stronger future evidence would include readable board numbers, confirmed revisions and repair outcomes from actual units.
Until then, the page improves inquiry quality and links users to related fault, circuit and workflow records.
Field record checklist
- Full model and voltage class
- Exact code or no-display symptom
- Operating condition at trip
- Motor/cable/load evidence
- Board label or drawing-family match
- Repair/replacement context
Technical basis and reference documents
This is an independent editorial technical reference. Original manufacturer documentation remains controlling for installation, repair and commissioning decisions.
Official SJ300 manual for safety warnings, error-code behavior and status-at-trip context.
Public troubleshooting source for E01 causes and status-at-trip use.
Service-level evidence for overcurrent detection, CT/noise and load routes.
Related technical records
The SJ300 / L300P trips E01 at constant speed, E02 during deceleration, E03 during acceleration, or E04 under another operating condition such as DC braking, current-transformer error or noise-induced current detection.
The SJ300 / L300P has no keypad display, intermittent resets, no readable trip history, a dead front panel after a power event, or a used keypad / motherboard replacement that does not restore operation.
Drive trips during constant speed, deceleration, acceleration or other running state.
Drive trips after sustained load, incorrect motor data or cooling trouble.
Blank keypad, intermittent reset or no fault code available.
Routes E01-E04 timing through motor/cable/load proof, output terminal evidence, current transformer or current feedback plausibility, noise/harness evidence and the boundary where the drive-side output stage becomes suspect.
Maps the drive-side boundary for persistent E01-E04 faults after motor/cable/load proof: gate-drive command, isolated driver supply, protection feedback, output bridge static evidence and repeat-failure prevention.
Separates dark display, intermittent reset and no-code cases into input energy, auxiliary supply startup, low-voltage rails, keypad connection and control-board load evidence.
Connects E01-E04 timing to load isolation, CT/current feedback evidence and output-stage suspicion.
No display requires low-voltage control supply and keypad/interface evidence because no code may be available.
Output-stage suspicion comes after motor/cable/load and current-feedback evidence are separated.
SJ300 or L300P reports E01, E02, E03 or E04 overcurrent, with the trip tied to constant speed, deceleration, acceleration or another operating condition.
E01-E04 overcurrent trip with operating-condition evidence.
Blank keypad, reset or no code available.
Turn this record into a qualified service request
A repair decision is much more reliable when the request includes the exact identity of the drive, the first fault evidence and the machine condition when the symptom appeared.
- Complete drive type code / MLFB or nameplate model
- Fault code, fault value and first event before reset
- When the event appears: power-up, enable, ramp, run, decel or stop
- Motor/cable connected or isolated during the symptom
- Visible board, option-card, module and connector identifiers
- Previous repair history, replacement parts and repeat-failure pattern